Basics of Fall Protection

Our industry is most commonly associated with window washing systems and suspended maintenance systems.  Because of this, fall protection (specifically on low-rise buildings) is often overlooked. 

Fall Arrest vs. Fall Restraint

“Fall protection” is actually a term that encompasses the method of either “fall arrest” or “fall restraint”.

Fall arrest prevents a person from reaching the ground (once a fall occurs).  An example of fall arrest is a worker tripping over the edge of a building but then being suspended midair (by a lanyard tied to a cable system) and not reaching the ground.

Fall restraint prevents a worker from even reaching a fall.  An example of fall restraint is a worker not being able to reach the edge of a building because a guard rail is located in the way.

guard2

Preventing Falls

Data shows that falls are the most common accident in the construction industry and that 75% of the falls occur at elevations of less than 3 stories.

A fall protection system can include:

  • Cable systems
  • Fixed ladders
  • Guard rails
  • Localized anchors

IMG0038a

When designing a fall protection system one must concerned itself with:

Function

 
What type of work is being completed while the system is in use?

Is it…

  • Washing the windows from a ladder

or fixing/replacing/servicing…

  • Antennas
  • Cooling tower
  • Drains
  • Equipment located on the façade of the building (from a ladder on the ground)
  • Lights
  • Mechanical units
  • Pipes
  • Roofing
  • Satellites
  • Surveillance cameras

Frequency


How often will this work occur?

If it is expected, routine, scheduled maintenance then the most user friendly system (to encourage its use) should be implemented.

If it is unexpected, non-routine, unscheduled maintenance then the most basic and cost effective system should be implemented.

Users


Who is using the system?

A worker who is trained and supervised may not require as much equipment as someone who is unfamiliar with fall protection.

IMG0086 

Falls can effectively be prevented with adequate safety equipment, proper training, and a suitable fall protection system.

The bottom-line is; fall protection equipment is needed:

  • In Canada, where any section of the parapet wall is less than 36 inches (and someone is subject to a 10 foot fall)
  • In the USA, where any section of the parapet wall is less than 42 inches (and someone is subject to a 4 foot fall)

Please like us on Facebook (www.facebook.com/ProBelPB) and follow us on Twitter (www.twitter.com/ProBelPB).


  1. Your comment is awaiting moderation.

    Very informative. Even as someone in the industry, I often confuse those terms. I’ve often said fall arrest when I meant fall restraint or fall protection to mean either one of the others. I know that a lot of my clients find this confusing as well.


    • Your comment is awaiting moderation.

      This post has actually inspired me to write a blog in the future about the top ten misconceptions in our industry!


  2. Your comment is awaiting moderation.

    will you mind if I retweet this post?

Leave a comment